|
|
Now that the new engine is in, time to hook it all back up. This should take a few hours to do. When you are all done,
I would go over everything twice to see if you missed anything. You are excited that it is in, but dont let it take your mind
off of the task at hand. You need to make sure everything is tight and that all of the fluids are in.
So your engine
is in, you've checked it twice, it looks great. Now head to the passenger side foot rest. Take out your old ECU, and add the
2 VTEC wires and ground, Knock Sensor, and some other plug that is located under the intake manifold. Be sure to use quality
wire, and original honda pins and sockets for this. It will just make life easier for you and whoever has to deal with your
car later.
Good Luck Everyone!
|